Call Number (LC) | Title | Results |
---|---|---|
E 1.99: conf-9509187-- |
Photovoltaic performance and reliability workshop An overview of service lifetime prediction (SLP) Highlights of the 1995 PV standards and codes forum The reliability and stability of multijunction amorphous silicon PV modules Overview and current status of DOE/UPVG̀s TEAM-UP Program Environmental testing of CIS based modules Improved methods for the measurement and modeling of PV module and system performance for all operating conditions Correlation of indoor accelerated testing with outdoor field testing related to weathering of materials Photovoltaics radiometric issues and needs Dependence of CdTe response of bias history A holistic view of crystalline silicon module reliability Utility-scale system preventive and failure-related maintenance Design and field performance of the KENETECH photovoltaic inverter system NREL module energy rating methodology The development and performance of smud grid-connected photovoltaic projects Recent advances in PV systems technology development in Europe EVA-based encapsulant evolution Evaluation of hybrid inverters for strategic environmental research and development program applications PV water pumping NEOS Corporation recent PV water pumping activities. Experiences with utility-scale PV systems DOE National Photovoltaic Program Outdoor Test Facility (OTF) Encapsulation and service lifetime Designing success or failures? Temperature and irradiance behavior of photovoltaic devices |
23 |
E 1.99: conf-9509187--1 | Analysis techniques used on field degraded photovoltaic modules | 1 |
E 1.99:CONF-9509187--2 | Polycrystalline thin-film module and system performance | 1 |
E 1.99:CONF-9509187--Summ | Proceedings of the IEA implementing agreement on photovoltaic power systems. Annex 4 workshop | 1 |
E 1.99:CONF-9509196--1 | Progress toward an optimized hydrogen series hybrid engine | 1 |
E 1.99:CONF-9509196--2 | Using monatomic nitrogen induced by a pulsed arc to remove nitrogen oxides from a gas stream | 1 |
E 1.99: conf-9509198--1 | Thermal decomposition of energetic materials by STMBMS measurements Application of Simultaneous Thermogravimetric Modulated Beam Mass Spectrometry (STMBMS) to the study of energetic materials. | 1 |
E 1.99: conf-9509199--1 | Explosion proofing the ̀̀explosion proof̀̀ vacuum cleaner | 1 |
E 1.99: conf-9509199--2 | Measured environments within 20 meters of the strike points of triggered lightning | 1 |
E 1.99: conf-9509199--3 | Reliable simulation of metal surface penetration by lightning continuing currents | 1 |
E 1.99:CONF-9509200--1 | The effect of rock-water interaction on permeability | 1 |
E 1.99: conf-9509201--1 | Impregnating magnetic components with MDA free epoxy | 1 |
E 1.99:conf-9509202--summ | R and D Evaluation Workshop report, U.S. Department of Energy, Office of Energy Research, September 7--8, 1995 | 1 |
E 1.99:CONF-9509203--1 | Why we doǹt need quantum planetary dynamics, or on decoherence and the correspondence principle for chaotic systems | 1 |
E 1.99:CONF-9509204--1 | In situ RF/microwave remediation of soil experiment overview | 1 |
E 1.99:CONF-9509204--2 | Use of a variable frequency source with a single-mode cavity to process ceramic filaments | 1 |
E 1.99: conf-9509205--1 | Micromachined sensor and actuator research at Sandiàs Microelectronics Development Laboratory | 1 |
E 1.99: conf-9509206--1 | Agile robotic edge finishing system research | 1 |
E 1.99: conf-9509206--2 | Automated robot inspection of spray painted surfaces | 1 |
E 1.99:CONF-9509207--1 | High resolution extremity CT for biomechanics modeling | 1 |