E 1.99:rn-s--0512
|
Benham seismic event summary report |
1 |
E 1.99:rn-s--0520
|
GTR-19 test to determine cryogenic radiation effects on structural materials. Final report |
1 |
E 1.99:rn-s--0529
|
Evaluation of test results for thin-film pressure transducer |
1 |
E 1.99:rn-s--534
|
BEARING RETAINER MATERIALS DEVELOPMENT. Final Report. |
1 |
E 1.99:rn-s--0541
|
Final report, CY 1969. Shielding code development program, project 393 |
1 |
E 1.99:rn-s--0542
|
Seismic-response analysis of engine test stand No. 1 |
1 |
E 1.99:rn-s--0549
|
Fabrication and properties of the fibrous reinforced graphite composite, AGCarb-101 |
1 |
E 1.99:rn-s--0553
|
Cryogenic radiation effects on Aluminum 7039 and Hastelloy X GTR-21 test 37R018. Final report |
1 |
E 1.99:rn-s--0556
|
ETS-1 seismic modifications, summary report |
1 |
E 1.99:rn-td--0058
|
Pump discharge shutoff valve random vibration testing. Final report |
1 |
E 1.99:rn-tm--0128
|
Properties of AISI type 347 stainless steel above 1500°F |
1 |
E 1.99:rn-tm--0139
|
Calculation of equation for specific heat and specific heat ratio as a function of temperature range limit 600°R to 1800°R |
1 |
E 1.99:rn-tm--0141
|
Design report turbine power control valve for use as diluent control valve in cryogenic service. |
1 |
E 1.99:rn-tm--0143
|
Tube wall temperature evaluation program. Summary to date |
1 |
E 1.99:rn-tm--0146
|
Test report result emergency cooldown check valve acceptance test for the Cold Flow Development Test System. |
1 |
E 1.99:rn-tm--0147
|
Predicted LH₂ pumping performance Mark III Mod 4 turbopump |
1 |
E 1.99:rn-tm--0150
|
Effects of modification to diffuser vanes on Mark III Mod 4 pumping performance |
1 |
E 1.99:rn-tm--0159
|
Basic loads and structural design criteria for the XE-1 engine |
1 |
E 1.99:rn-tm--0166
|
Mark III, turbine assembly thermal analysis |
1 |
E 1.99:rn-tm--0170
|
Feasibility report for a high output strain gage accelerometer |
1 |