E 1.99:wanl-tme--846
|
Analysis and design significance of nozzle interface seal leakage test results |
1 |
E 1.99:wanl-tme--865
|
Flow rate and pressure drop characteristics of an Inconel X-750 nozzle interface seal |
1 |
E 1.99:wanl-tme--867
|
Nozzle interface seal test mechanical loading and seal leakage. Final report, EML-26. |
1 |
E 1.99:wanl-tme--870
|
Reactor non-fuel materials program, 1964--1965 |
1 |
E 1.99:wanl-tme--874
|
WANL fuel material irradiation program. Capsule series T-T (phase II) |
1 |
E 1.99:wanl-tme--875
|
Acoustic noise tests of accelerometers and amplifiers |
1 |
E 1.99:wanl-tme--885
|
Development of an improved ''bubble through'' saturator |
1 |
E 1.99:wanl-tme--895
|
Requirements for capsule disassembly and post-irradiation analysis. Fuel irradiation program, series T-T. Phase II |
1 |
E 1.99:wanl-tme--896
|
Effect of orbital destruct of nuclear rockets on earth contamination |
1 |
E 1.99:wanl-tme--899
|
Acceptance test specifications/procedure for thermocouples |
1 |
E 1.99:wanl-tme--902
|
Core insulation assembly thermal test. Final report |
1 |
E 1.99:wanl-tme--903
|
Foil type insulating sleeve vibration test. Final report |
1 |
E 1.99:wanl-tme--904
|
Calibration specification for pressure transducers |
1 |
E 1.99:wanl-tme--905
|
Acceptance test specifications for pressure transducers |
1 |
E 1.99:wanl-tme--909
|
Effect of heat treating and brazing processes on instrumentation |
1 |
E 1.99:wanl-tme--910
|
Evaluation of metallurgical processes for fabrication of aluminum core support barrel |
1 |
E 1.99:wanl-tme--912
|
Acceptance test specifications for accelerometers |
1 |
E 1.99:wanl-tme--913
|
Calibration specification for accelerometers |
1 |
E 1.99:wanl-tme--914
|
Strain gages experiment No. 23/W406, irradiated at Plum Brook Reactor Facility, PBRF cycle 20P. Preliminary data report |
1 |
E 1.99:wanl-tme--916
|
Pressure transducers experiment No. 23/W506, irradiated at Plum Brook Reactor facility, PBRF cycle 22P (PB No. 8W). Preliminary data report |
1 |