NAS 1.15:2012-217605
|
Variable-speed power-turbine research at Glenn Research Center |
1 |
NAS 1.15:2012-217607
|
Comparison of various supersonic turbine tip designs to minimize aerodynamic loss and tip heating |
1 |
NAS 1.15:2012-217608
|
Acoustic performance of an advanced model turbofan in three aeroacoustic test facilities |
1 |
NAS 1.15:2012-217609
|
High-data-rate quadrax cable microwave characterization at the NASA Glenn Structural Dynamics Laboratory / |
1 |
NAS 1.15:2012-217610
|
Structural dynamic assessment of the GN2 piping system for NASA's new and powerful reverberant acoustic test facility |
1 |
NAS 1.15:2012-217611
|
Experimental investigation of augmented spark ignition of a LO₂/LCH₄ reaction control engine at altitude conditions / |
1 |
NAS 1.15:2012-217612
|
Analysis of buzz in a supersonic inlet |
1 |
NAS 1.15:2012-217613
|
Analysis of 100-lb[subscript f] (445-N) LO₂-LCH₄ reaction control engine impulse bit performance |
1 |
NAS 1.15:2012-217614
|
OH planar laser induced fluorescence (PLIF) measurements for the study of high pressure flames a evaluation of a new laser and a new camera system / |
1 |
NAS 1.15:2012-217615
|
Best practices for the application of functional near infrared spectroscopy to operator states sensing |
1 |
NAS 1.15:2012-217616
|
Experimental study of boundary layer flow control using an array of ramp-shaped vortex generators |
1 |
NAS 1.15:2012-217617
|
Active combustion control for aircraft gas-turbine engines experimental results for an advanced, low-emissions combustor prototype / |
1 |
NAS 1.15:2012-217618
|
Performance evaluation of a high bandwidth liquid fuel modulation valve for active combustion control / |
1 |
NAS 1.15:2012-217619
|
Wear of steel and Ti6Al4V rollers in vacuum / |
1 |
NAS 1.15:2012-217620
|
Research on supersonic inlet bleed |
1 |
NAS 1.15:2012-217621
|
Macro scale independently homogenized subcells for modeling braided composites |
1 |
NAS 1.15:2012-217622
|
Investigation of a Moiré based crack detection technique for propulsion health monitoring |
1 |
NAS 1.15:2012-217623
|
A compendium of brazed microstructures for fission power systems applications |
1 |
NAS 1.15:2012-217625
|
Ballistic impact testing of aluminum 2024 and titanium 6A1-4V for material model development |
1 |
NAS 1.15:2012-217627
|
Application of the semi-empirical force-limiting approach for the CoNNeCT SCAN Testbed / |
1 |