NAS 1.15:88838
|
A constitutive law for finite element contact problems with unclassical friction |
1 |
NAS 1.15:88839
|
Effect of an oxygen plasma on the physical and chemical properties of several fluids for the liquid droplet radiator |
1 |
NAS 1.15:88840
|
The effect of Cr, Co, Al, Mo, and Ta on a series of cast Ni-base superalloys on the stability of an aluminide coating during cyclic oxidation in Mach 0.3 burner rig |
1 |
NAS 1.15:88841
|
Estimation of high temperature low cycle fatigue on the basis of inelastic strain and strainrate |
1 |
NAS 1.15:88842
|
Creep properties of PWC-11 base metal and weldments as affected by heat treatment |
1 |
NAS 1.15:88843
|
Gear mesh compliance modeling |
1 |
NAS 1.15:88844
|
Optical alignment of Centaur's inertial guidance system |
1 |
NAS 1.15:88845
|
Thermohydrodynamic analysis for laminar lubricating films |
1 |
NAS 1.15:88846
|
RE-1000 free-piston Stirling engine sensitivity test results |
1 |
NAS 1.15:88847
|
The space station power system |
1 |
NAS 1.15:88848
|
Status of advanced propulsion for space based orbital transfer vehicle |
1 |
NAS 1.15:88850
|
Plasma contactors for electrodynamic tether |
1 |
NAS 1.15:88851
|
Research instrumentation for hot section components of turbine engines |
1 |
NAS 1.15:88852
|
An Analytical and experimental investigation of resistojet plumes |
1 |
NAS 1.15:88853
|
Advanced instrumentation for aeronautical propulsion research |
1 |
NAS 1.15:88854
|
Concentrated mass effects on the flutter of a composite advanced turboprop model |
1 |
NAS 1.15:88855
|
Ultrasonic determination of recrystallization |
1 |
NAS 1.15:88856
|
Electrical power system for the U.S. Space station |
1 |
NAS 1.15:88857
|
Structural dynamic measurement practices for turbomachinery at the NASA Lewis Research Center |
1 |
NAS 1.15:88858
|
Common problems and pitfalls in gear design |
1 |