Call Number (LC) Title Results
Y 3.N 21/5:6/2792 Direct-reading design charts for 24S-T3 aluminum-alloy flat compression panels having longitudinal formed hat-section stiffeners and comparisons with panels having z-section stiffeners / 1
Y 3.N 21/5:6/2793 A method for the determination of the time lag in pressure measuring systems incorporating capillaries / 1
Y 3.N 21/5:6/2794 A comparison of two methods of linearized characteristics for a simple unsteady flow / 1
Y 3.N 21/5:6/2795 Effects of wing sweep on the upwash at the propeller planes of multiengine airplanes / 1
Y 3.N 21/5:6/2796 Experimental study of the effects of finite surface disturbances and angle of attack on the laminar boundary layer of an NACA 64A010 airfoil with area suction / 1
Y 3.N 21/5:6/2797 A study of the transient behavior of shock waves in transonic channel flows / 1
Y 3.N 21/5:6/2798 An experimental investigation of the behavior of 24S-T4 aluminum alloy subjected to repeated stresses of constant and varying amplitudes / 1
Y 3.N 21/5:6/2799 Simple graphical solution of heat transfer and evaporation from surface heated to prevent icing / 1
Y 3.N 21/5:6/2800 Solutions of laminar-boundary-layer equations which result in specific-weight-flow profiles locally exceeding free-stream values / 1
Y 3.N 21/5:6/2801 Investigation with an interferometer of the flow around a circular-arc airfoil at Mach numbers between 0.6 and 0.9 / 1
Y 3.N 21/5:6/2802 Bonding of molybdenum disulfide to various materials to form a solid lubricating film. : 2 - Friction and endurance characteristics of films bonded by practical methods / 1
Y 3.N 21/5:6/2803 A theoretical and experimental investigation of the influence of temperature gradients on the deformation and burst speeds of rotating disks / 1
Y 3.N 21/5:6/2804 The planing characteristics of a surface having a basic angle of dead rise of 20 degrees and horizontal chine flare / 1
Y 3.N 21/5:6/2805 An engineering method for estimating notch-size effect in fatigue tests on steel / 1
Y 3.N 21/5:6/2806 Comparison of two- and three-dimensional potential-flow solutions in a rotating impeller passage / 1
Y 3.N 21/5:6/2807 Measurements of temperature variations in the atmosphere near the tropopause with reference to airspeed calibration by the temperature method / 1
Y 3.N 21/5:6/2808 Short-bearing approximation for full journal bearings / 1
Y 3.N 21/5:6/2809 Experimental investigation of eccentricity ratio, friction, and oil flow of short journal bearings / 1
Y 3.N 21/5:6/2810 One-dimensional analysis of choked-flow turbines / 1
Y 3.N 21/5:6/2811 On the calculation of flow about objects traveling at high supersonic speeds / 1