Hydrogen transport and cracking in metals : proceedings of a conference held at the National Physical Laboratory, Teddington, UK, 13-14 April 1994 / edited by Alan Turnbull.
Saved in:
| Online Access: |
Full Text (via Taylor & Francis) |
|---|---|
| Corporate Author: | |
| Other Authors: | |
| Format: | eBook |
| Language: | English |
| Published: |
London :
Institute of Materials,
1995.
|
| Series: | Book (Institute of Materials (London, England)) ;
605. |
| Subjects: |
Table of Contents:
- Contents
- Foreword
- Hydrogen Cracking and its Mitigation in the Petroleum Industry
- The Significance of Hydrogen on the Welding and Weldability of Duplex and Super Duplex Stainless Steels
- A Review
- Experimental Investigation of the Role of Hydrogen in Stress Corrosion Cracking of Duplex Stainless Steels
- Influence of Cathodic and Corrosive Hydrogen on the Cracking Behaviour of Austenitic Iron and Nickel Base Alloys
- Influence of Surface Defects on Hydrogen Effects During Stress Corrosion
- The Influence of Cathodic Overpotential on Microstructural and Physically-Small Crack GrowthPredicting Hydrogen Induced Crack Growth Rates in Pipelines and Pressure Vessels
- Stress Corrosion Cracking of a Cathodically Charged Structural Steel
- Time-Dependent Factors in the Corrosion Fatigue Testing of Cathodically Protected Low Alloy Steels
- Mechanistic Aspects of Hydrogen Cracking Process in High Strength Steel
- Some Considerations on the EAC Mechanisms during Crack Propagation under Monotonic Loading
- Acoustic Emission during Hydrogen Charging and Stress Corrosion CrackingChloride Assisted Cracking in Blade Steel Material
- the OCP Analysis
- Standardisation of Hydrogen Permeation Measurement by the Electrochemical Technique
- Surface Phenomena on Pure Iron during Electrochemical Permeation Tests
- Palladium as a Catalyst of Hydrogen Oxidation
- Measurement of Effluent Hydrogen in Pressure Vessel and Linepipe Steels
- Reliability of Clamp-on Sensors for Hydrogen Permeation Measurements
- Hydrogen Concentration Measurements Using a Gel-Filled Electrochemical Probe
- Methods of Hydrogen Uptake Measurements by Electrochemical Permeation Test on Low Alloy SteelsThe Effect of the Nitrides and Carbides of V, Nb and Ti on the Diffusion and Dissolution of Hydrogen in Iron
- Hydrogen Diffusion and Trapping in Cr-Mo Steels for Hydrotreating Reactors
- A Study of Hydrogen Permeation on API X65 TMCP Steel Under Stress Conditions
- The Influence of Pressure on Hydrogen Permeation and Hydrogen Embrittlement of Higher Strength Steels
- Hydrogen Transport in SAF220S and SAF2S07 Duplex Stainless Steels
- Hydrogen Permeation Measurements in Aluminium Alloy FoilsLaboratory Testing of Hydrogen Permeation in Biologically Active Seawater
- Measurements of Hydrogen Diffusion through Cathodically Protected Steel in Sour Environments
- Generalised Modelling of Hydrogen Diffusion and Trapping
- Internal Friction in Hydrogen-Charged CrNi and CrNiMn Austenitic Stainless Steels
- Subject Index